Optiview TRKPTZ-18NX User Manual download pdf (Page 19)

Auto Zooming Tracking Dome Camera User Manual

ratio label is displayed when zoom is activated.

Azimuth/elevation and direction labels are displayed when

pan/tilt is activated. The dome label is displayed when the dome

label is activated.

The following settings are available foe each label:

OFF: The label is not displayed when activated.

ON: The label shows when activated.

3.4.2 Label Position

Labels can be placed anywhere on the monitor. This feature

enables you to customize the place of labels on monitor screen.

Figure 3.4 Label Position

To set a label position:

(1) Move joystick to position the cursor beside a label.

(2) Press iris Open.

(3) Move joystick to move the label up, down, left, or right.

(4) Press iris Open.

(5) Repeat steps 1 through 4 to position other labels.

(6) Move the cursor to Save and press iris Open to save

settings and return to display setup menu.

ZONE CAMERA PRESET

SAVE

RESET

AZIMUTH

ZOOM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 52 53

No comments

Optiview TRKPTZ-18NX User Manual Page 19