Optiview TRKPTZ-18NX User Manual download pdf (Page 29)

Auto Zooming Tracking Dome Camera User Manual

PANTTERN 3: Dome runs pattern3.

PANTTERN4: Dome runs pattern4.

SCAN SPEED:

Scan speed is that the dome will pan when in a FRAME

SCAN mode. Scan speed is adjustable from 1 to 32 via the

programming menu.

SET SCAN STOPS:

Set Scan Stops are programmable stops that limit the pan

range of the dome. There must be two limits, a left and a right, to

define an area. The dome reverses direction frame scanning

when a limit stop is reached.

To set scan stops:

(1) Move joystick to position the cursor beside set scan

stops.

(2) Press iris Open.

(3) Follow the directions displayed on the monitor.

CLEAR SCAN STOPS:

To clear scan stops:

(1) Move joystick to position the cursor beside clear scan

stops.

(2) Press iris Open.

(3) Follow the directions displayed on the monitor.

SET MANUAL LIMIT:

<Set manual limit > is to set the P/T/Z‟s moving range.

To set manual limit:

(1) Move joystick to position the cursor beside set manual

limit.

(2) Press iris Open.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 52 53

No comments

Optiview TRKPTZ-18NX User Manual Page 29