Optiview TRKPTZ-18NX User Manual download pdf (Page 30)

Auto Zooming Tracking Dome Camera User Manual

(3) Follow the directions displayed on the monitor.

SET AZIMUTH ZERO:

Azimuth is the pan angle from 0°to 359°.Azimuth zero is

the pan position you specify to be the 0°point. Azimuth zero is

normally set to magnetic north. Once set, azimuth and compass

readings are based on the set Azimuth Zero point.

To program azimuth zero:

(1) Move joystick to position the cursor beside set azimuth

zero.

(2) Press iris Open.

(3) Follow the directions displayed on the monitor.

CLEAR AZIMUTH ZERO:

(1) Move joystick to position the cursor beside CLEAR

AZIMUTH ZERO.

(2) Press iris Open

(3) Follow the directions displayed on the monitor.

3.5.4 Power Up

Move joystick to select <power up>, press Open to enter the

power up menu shown as Fig3.10.

Figure 3.10 POWER UP

POWER UP ACTION:

POWER UP

POWER UP ACTION NONE

BACK

EXIT

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 52 53

No comments

Optiview TRKPTZ-18NX User Manual Page 30